Last Modified: 11-29-2007 1.6 A
Service Category: Drivetrain Section: Axle/Differential
Model Year: 2008 Model: Sequoia Doc ID: RM00000306I006X
Title: AXLE AND DIFFERENTIAL: FRONT AXLE HUB BOLT: REPLACEMENT (2008 Sequoia)

REPLACEMENT

HINT:

  • Use the same procedure for the LH side and RH side.
  • The procedure listed below is for the LH side.

1. REMOVE FRONT WHEEL

2. DISCONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH AXLE AND DIFFERENTIAL: FRONT AXLE HUB: REMOVAL (2008 Sequoia)+

3. REMOVE FRONT DISC BRAKE (FRONT): FRONT BRAKE: REMOVAL (2008 Sequoia)+

4. REMOVE FRONT AXLE LH HUB BOLT

(a) Using SST and a screwdriver or equivalent to hold the axle hub, remove the front axle hub bolt.

SST: 09650-17011

NOTICE:

Do not damage the threads of the hub bolts.

5. INSTALL FRONT AXLE LH HUB BOLT

(a) Temporarily install a washer and hub nut to a new hub bolt as shown in the illustration.

NOTICE:

Install hub nuts to prevent damage to the hub bolts.

(b) Using a screwdriver or equivalent to hold the hub, turn the hub nut until the bottom surface of the hub bolt head touches the axle hub.

(c) Remove the washer and hub nut.

NOTICE:

Do not damage the threads of the hub bolts.

6. INSTALL FRONT DISC BRAKE (FRONT): FRONT BRAKE: INSTALLATION (2008 Sequoia)+

7. CONNECT FRONT DISC BRAKE CALIPER ASSEMBLY LH AXLE AND DIFFERENTIAL: FRONT AXLE HUB: INSTALLATION (2008 Sequoia)+

8. INSTALL FRONT WHEEL

  • for Aluminum Wheel

Torque: 131 N·m (1336 kgf·cm, 97 ft·lbf)

  • for Steel Wheel

Torque: 209 N·m (2131 kgf·cm, 154 ft·lbf)